In terms of printed products, small batch jobs require low cost and short delivery time; and product quality often requires bright colors, and most of the layered layouts are composed of dots. According to this situation, many small printing companies have adopted six-color monochromatic offset presses for four-color overprinting, which has also achieved very good results.
Mass printing is mostly offset printing, gravure printing, letterpress resin printing or flexographic printing. However, the demand for personalized small batch of self-adhesive labels on the market is increasing. Tens of thousands of small labels For six-fold and eight-fold single sheets, some thousands and hundreds of copies, the web label printer is a bit wasteful when printing such jobs, which is not cost-effective.
In terms of printed products, small batch jobs require low cost and short delivery time; and product quality often requires bright colors, and most of the layered layouts are composed of dots. According to this situation, many small printing companies have adopted six-color monochromatic offset presses for four-color overprinting, which has also achieved very good results. Taken together, it has the following advantages.
In offset printing, relief printing, gravure printing and other printing, offset printing is undoubtedly the lowest cost printing method. In the pre-press process, compared with the complex plate-making process of the flexographic version, the production, production and printing of the PS plate are familiar to the printing house. From a technical point of view, all printing plants have turned to offset printing after eliminating lead printing, so there is no additional burden.
If a roll-fed adhesive printing machine is used, there will be a loss of more than ten meters of paper when the machine is turned on. If the overprint adjustment is not good, and the paper line of the unit-type printing machine is longer, the waste is greater. The offset press can use other paper to make version paper, saving self-adhesive materials.
Compared with relief printing and flexographic printing plates, offset printing plates are cheaper and do not require much auxiliary materials. When printing paper of different thicknesses, the printing pressure can be adjusted at will. In terms of operation, offset printing technicians are also easy to hire, and the technical threshold is not high.
The practice of the printing factory has proved that the cost of printing small adhesive labels with an offset printing machine can be reduced to "cents". If it is processed by incoming materials, even if the profit is calculated in "cent" and "cent", there is profit.
Different from the stickers in Japan and other countries, the stickers in China are mostly based on rich layers of graphic work, especially in small batches, which often require colorful colors. Offset printing has advantages in dot printing, and on-site printing is not inferior. If you need to increase the thickness of the ink, you can use the advantage of accurate overprinting for secondary printing. Because it is a small batch printing, time can be guaranteed.
Adopting quick-drying ink for offset printing, adding desiccant to the ink, and spraying powder after printing can also effectively solve the problem of staining of printed products and improve printing speed.
Short-run work printing emphasizes timeliness. If the early plate-making process is complicated and the plate-making cycle is long, it will inevitably affect the delivery period. The offset platemaking cycle is short, which is a suitable choice for short-form live label printing with complex patterns and strong timeliness. According to the experience of Foshan label printing factory, it is recommended that printing equipment should be used in quantity, and select the appropriate equipment to print the corresponding products.
Synthetic wire Paint Brush is also widely used at present. Many kinds of synthetic filament, hollow wire, cross wire and so on, can replace the traditional oil paint bristles, their large, very soft brush.
Production process: drawing, integration, cutting, polishing, finishing, mixing
Different wire diameter is different, it is different in paint capacity, brush out of different areas.
The top of the synthetic wire needs to be corroded so that it can be painted at many points.
Plastic Hair Brush,Synthetic Brush,Wooden Handle Synthetic Brush,Synthetic Fiber Brush
Zhenjiang Yongjiufa brush industry Co. Ltd. , https://www.yongfa-brushs.com